Unfortunately they have given no guidance as to account for these factors. March Learn how and when to remove this template message. In other words, if the user of these devices with “poor precision” is getting paid to get a result of “slippery” or “not slippery”, then an experienced user will get that result, no matter what the truth of the matter is at hand. Shortly after being published in , ASTM withdrew these standards in , with no replacement. The Variable-Angle Ramp is a German-developed method for obtaining pedestrian slip resistance values.

Uploader: Tojarg
Date Added: 9 March 2012
File Size: 25.21 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 52438
Price: Free* [*Free Regsitration Required]

This test method can be used in the laboratory astm c1028 in the field. CTIOA has endorsed a minimum dynamic coefficient of friction for level floors of 0. Two more astm c1028 to remember: Shortly after being published inASTM withdrew these standards inwith no replacement. There have been numerous floor slip resistance testing tribometers and lab devices produced around the world to measure both the static stationary and dynamic in c10228 coefficient of frictionbut presently there are only a few that have been proven to be reliable for obtaining useful safety results and that have current official test methods.

But as astm c1028 earlier, an instrument must be able to pass ASTM F, but must also be able to provide a “reasonable precision statement” required from all standards publishing agencies.

The ASTM C static coefficient of friction test is widely recognized to be inappropriate for assessing pedestrian safety. The pendulum uses a standardized piece of rubber FourS rubber also known as Slider 96which is set up to travel across the flooring sample for mm, mounted onto the astm c1028 foot.

Two operators repeat this test three times and then an average is calculated. This is recorded as the “DCOF”, or the amount of friction necessary to drag dynamic meaning “in motion” the standardized rubber across the flooring. This standard is being withdrawn without replacement due to its limited use by industry.


Floor slip resistance testing

Unfortunately they astm c1028 given no guidance as to account for these factors. In other words, if the user of these devices with “poor precision” is getting paid to get a result of “slippery” or “not slippery”, then astm c1028 experienced user will get astm c1028 result, no matter what the truth of the matter is at hand. Although this ASTM test method was ast, with good intentions, the test is often conducted and interpreted by people who have a vested interest in their tribometer having passed astm c1028 test.

Adtm samples are mounted horizontally on the ramp tester and an operator clad in safety boots or bare feet performs a standardized walk atsm and down the sample while wearing a harness to stop the operator from being injured.

Constructs such as ibid. It is also difficult for the operator ashm influence the results of the test unlike some tribometers since an electronic button is pushed and then the test is run without any further help from the operator. This ASTM test standard has expired, and there are no plans to renew it as it has caused more confusion than anything else. Web View Mobile View. The latest building code requires a 0.

Although this test is necessary for a tribometer to pass, it is not sufficient in validating a astmm as indicative of the human traction potential of a walking surface. This makes it a credible forensic science device.

If an instrument has no official published test method, then there is a problem with the instrument, often being poor precision. The BOTE is a drag-sled meter, which means that it crawls along the floor under its own power at a constant speed measuring the resistance to slip asym a standardized piece of rubber loaded into the bottom of the machine.


ASTM C – an unreliable, withdrawn floor test – Home

This test was developed for pedestrian traction by the U. A good correlation with ramp test results can help a astm c1028 resistance test device become more widely used and accepted. Here is some information on currently valid slip test methods. Journal of Forensic Sciences. The pendulum is also used in the U. Ground and Floor Surfaces ” that clears up much c0128 the confusion about this issue and which has no [static] COF recommendation or asm.

There are no plans to resurrect this poor test method for measuring wet static coefficient of friction SCOF. Commonly misunderstood, this document never set a requirement and has astm c1028 been withdrawn. Referenced Documents purchase separately The documents listed below are referenced within the subject standard but are not provided as part of the qstm.

Floor slip resistance testing – Wikipedia

If the floor c11028 likely to be lubricated with water or grease in use, it needs to be anti-slip under these expected conditions. From Wikipedia, the free encyclopedia.

Requirements for a minimum slip resistance for tiled indoor wet areas pool decks, showers, some lobbies, commercial kitchens, etc. Monitoring changes in dry SCOF can be a useful practice.