Newton Meter Calculator (2024)

Last updated:

Table of contents

What is a newton meter?Newton meter calculatorNewton meter conversionNewton meter and torqueFAQs

Our newton meter calculator is here to help you convert from a newton meter to a list of other torque-measuring units.

You might never have thought of needing a calculator to assist you in converting a newton meter to a foot-pound. But you would have wondered, is a newton meter a joule? Or how much does 1 newton meter equal? You are at the right place, no matter how big or small your question is.

So, let's start by talking about what a is newton meter.

What is a newton meter?

Newton meter is a unit that measures torque and work/energy.

Torque is the turning effect of force. In other words, it is a force that can cause an object to rotate. For instance, you were tightening a nut using a wrench. The motion would be rotational. And we would say the torque was 'x' newton meter (x being any number).

It would be good to remember that 1 newton meter equals the force of 1 newton applied to a moment arm of 1 meter.

We have a work and power calculator that you may wanna check out to get to know more about work and the units that measure it.

Newton meter calculator

The newton meter calculator is one of the simplest tools of its kind. It is effortless to use and has a list of unit options to choose from.

Newton meter is the unit of torque, but so is the foot-pound force, and many others. This means you have a long list of units you can convert from by using the newton meter as your base conversion.

So to use our tool, you must start by entering your amount in the unit of your choice. And then, in the second field, you have the result converted in the unit you chose to convert it to.

For instance, you want to convert 7 N·m to dyn cm. The first field has a default unit of N·m, and you enter 7. In the second field, change the unit to dyne centimeter, and you have your result: 70,000,000 dyn cm.

But the best part is that the tool works in reverse as well. If you want to convert from 5 ton-foot meter to a newton meter, the tool will determine the result of 49,020 N·m.

Newton meter conversion

The newton meter conversion is easy, straightforward, and much-needed. We understand not all calculations use the same units of measurement and require different units in situations. This is why we have created the newton meter calculator to help you convert from newton meter to ft-lbs (foot-pound force), or kN·m (kilonewton meter), and much more.

The list of units we provide to convert from is as follows:

  • Kilonewton meter;
  • Millionewton meter;
  • Micronewton meter;
  • Foot-pound force;
  • Dyne centimeter;
  • Kilogram-force meter;
  • Ton-force meter; and
  • Poundal foot.

Newton meter and torque

Imagine force applied on an object. Now imagine the object rotates due to that force. This is torque. Simple yet so significant.

If you want to know more about it, you may want to check out our torque calculator.

Torque is also measured in joules on occasion as the newton-meter is equivalent to joules, the SI unit of work. Since they are equal to each other, one can be converted into the other. And if that is something of interest to you, it is highly recommended to try out Omni's nm to joules calculator.

FAQs

Can we measure torque in newton meter?

Yes, we can. Newton meter is the SI unit of torque.

Torque is the force that rotates an object. It involves force, its unit is the newton, and the distance the object is moved, and the unit is the meter. So, combining them both, the newton meter becomes the unit to measure torque.

How much is 2.4 foot-pounds in newton meter?

2.4 foot-pounds (ft·lbs) equals 3.254 newton meters (N·m).

The conversion is straightforward, and all you have to remember is that:

1 ft·lbf = 1.3558 N·m

So, to convert from foot-pound force to newton meters

  1. Note the amount in foot-pounds.
  2. Multiply it by 1.3558.
  3. The result is the quantity in the newton meters.

Is a newton meter a joule?

Yes, a newton meter is equal to a joule. Joule is the SI unit of work and energy.

One joule of work occurs when a force of one newton displaces an object through a distance of one meter.

How can I convert Nm to poundal force?

The conversion from newton meter (N·m) to poundal force (pdl·ft) is simple and requires one small step. But before that, you need to know that 1 N·m = 23.2 poundal force.

So, all you have to do is:

  1. Multiply your amount in newton meters by 23.2; and
  2. You have your result in poundal force.

It couldn't get any easier.

Newton Meter Calculator (2024)

FAQs

How to calculate a newton meter? ›

Multiply the number of newtons and the distance the object was lifted to get the unit of work, which is called a newton-meter (N-m). 5. One newton-meter is equal to one joule (unit of measure for energy or work).

How much torque is 1 Nm? ›

How is torque measured? Torque is usually measured in Newton metres (Nm) or you might see the imperial measurement of lb-ft (pounds-feet), although this unit of measurement is pretty outdated by now. If you want to calculate the conversion for yourself, 1 Nm is equivalent to 0.738 lb/ft.

How do you calculate Nm? ›

Calculating nanometers from wavenumber

To convert from wavenumber (cm-1) to nanometers, use the following equation: 1/cm-1 x 107 = nanometers. Or to convert from nanometers to wavenumber, you simply reverse the equation so that wavenumber (cm-1) = 107 / wavelength in nanometers. Or use the tool below.

How to calculate a newton? ›

The definition of a Newton, the standard unit of force, is N = kg * m/s^2. Always read a question carefully to determine whether weight or mass is given. Check to be sure all numbers have been converted to kilograms and m/s^2.

How much torque is 10 nm by hand? ›

You cannot generate 10 Nm torque with your fingers. 1kilogram is about 10N (newtons), which is 2.2lbs. 1 meter is a little more than about a yard, or 39 inches. So, 10nm is the same as pushing “down” on a 1 yard long stick at one end, but attached solidly at the other end, with a “push” of about 2.2lbs.

How many nm is hand tight? ›

25 nM is "hand tight" in my book. Do NOT use a tool with a long handle on this, if using a socket and a ratchet I would either grab the ratchet by the pivot (not the handle), or use an extension without the ratchet (think like a screwdriver)

How to calculate torque? ›

Torque (also called moment — mostly by engineers) is calculated by multiplying force and distance. The SI units of torque are newton-meters, or N*m (even though these units are the same as Joules, torque isn't work or energy, so should just be newton-meters).

How tight is 8 newton meters? ›

8 NM OF TORQUE = 70.81 lb ft. I would use an inch pound torque wrench with a range of 0 to 100 in.

How tight is 5Nm feel? ›

5Nm is finger tight + one turn of the Allen Key until you feel slight resistance.

How tight is finger tight torque? ›

The smaller the fitting the easier it is to overtighten. Finger tighten is tightening with finger only, no tools, to a torque of about 1.2 to 1.7 foot-pounds (1.7 to 2.3Nm). Do not overtighten joints by giving one more turn just to be sure.

What is 1 newton meter equal to? ›

The newton meter is a measurement of torque. One newton meter is equal to approximately 0.738 pound-feet. It's easy to confuse the newton meter with newton times a meter, which is a joule and a unit of energy.

How much is 1 newton meter? ›

The newton meter is a measurement of torque. One newton meter is equal to approximately 0.738 pound-feet.

What is a Newton meter equal to? ›

One newton-metre is equal to the torque resulting from a force of one newton applied perpendicularly to the end of a moment arm that is one metre long.

How do you calculate 1 newton? ›

The Newton unit (N) considers all of the above measurements. Thus, a single newton is the amount of force required to accelerate 1 kilogram of mass 1 meter per second squared in a specific vector of direction. The formula for force is written as: 1N = 1kg (m/s/s).

What is Newtons formula? ›

Newton's second law, which states that the force F acting on a body is equal to the mass m of the body multiplied by the acceleration a of its centre of mass, F = ma, is the basic equation of motion in classical mechanics.

References

Top Articles
Latest Posts
Article information

Author: Delena Feil

Last Updated:

Views: 5863

Rating: 4.4 / 5 (65 voted)

Reviews: 80% of readers found this page helpful

Author information

Name: Delena Feil

Birthday: 1998-08-29

Address: 747 Lubowitz Run, Sidmouth, HI 90646-5543

Phone: +99513241752844

Job: Design Supervisor

Hobby: Digital arts, Lacemaking, Air sports, Running, Scouting, Shooting, Puzzles

Introduction: My name is Delena Feil, I am a clean, splendid, calm, fancy, jolly, bright, faithful person who loves writing and wants to share my knowledge and understanding with you.